Jump to Navigation

發表新回應

one) Fill in the use record in time after functioning the glove box, like “user, water oxygen benefit, what to do”. two) When replacing fuel cylinders in the glove box, the strain is set to the default worth ± 3mbar.

three) The daily working stress is set in accordance to the running convenience. When not in use for a lengthy time, the strain is set to one-6mbar.

http://b3.zcubes.com/v.aspx?mid=5051882 ) Often check the dress in of the gloves, verify the oil amount of the vacuum pump (amongst the upstream and downstream markings), and add the pump oil correctly. 5) Clear the h2o probe as soon as each and every 2 to three months to make certain accurate detection. (Also need to refer to the true scenario of the atmosphere in different person containers) six) If you typically use organic solvents in the glove box, it is advised that you routinely replace the natural solvent adsorbent material, not later on than 1 12 months at the latest. seven) Replace the filter factor regularly, no later than two many years. 8) In accordance to the real use of your glove box, determine to substitute the vacuum pump oil cycle, this kind of as black and yellow pump oil, h2o or more organic solvents in the pump oil. The oil substitute cycle ought to not exceed 2 several years at the newest. nine) If a large sum of natural solvent is inevitably uncovered for the duration of the experiment, the cycle wants to be stopped for the experiment. Soon after the experiment, 1st thoroughly clean and then start off the cycle. 10) When the environment in the box is toxic or harmful fuel, the exhaust port of the vacuum pump, the exhaust port of the regeneration fuel and the exhaust port of the cleaning valve need to be exhausted to the outdoor with an exhaust pipe (when exhaust is not permitted to be outside, the exhaust fuel treatment method have to be completed 1st).



Main menu 2

by Dr. Radut.