Jump to Navigation


Etelux reminds you that in addition to the standard inspection of the glove box, the everyday routine maintenance operate of the

http://etelux.booklikes.com/post/3100630/routine-upkeep-of-the-glove-box is also needed one. Before and

https://zenwriting.net/etelux/the-solution-when-the-glove-box-encounters... after each operate, first clear the environment to make the floor dry and thoroughly clean. Then cleanse the tools, such as the interior and outer surfaces of the glove box, the observation technique, the work area, and many others., to be free of charge of debris and thoroughly clean. 2. Carefully document the h2o, oxygen articles, and gas consumption of the products in the glove box every working day to keep away from insufficient gasoline pressure and trigger the tools to end working. 3. Spend attention to the quantity of fuel in the working gas cylinder at any time and replace it in time. four. In circumstance of energy failure, press the “vacuum pump” button on the panel to make the vacuum pump run following energy on. 5. Notice: After

https://etelux.doodlekit.com/blog/entry/10514576/etelux-glove-box-regene... on, if there is a issue that it are not able to start off, the chance is that the vacuum pump power cable is loosely connected. The next explanation is that the vacuum pump’s personal swap is not turned on. six. When you want to put the sample into the glove box, use a small changeover chamber as much as possible. Just before opening the transition doorway, spend focus to whether the strain gauge pointer on the valve cavity is at the zero position. If it is, you can open up it immediately if not, you want to change the swap underneath the valve cavity to the “filling” situation to enable the gas enter the glove box transition compartment, and then flip the switch again to the intermediate position, then you can open the transition compartment Place the sample in the door, and then close the door. When placing samples, be careful not to contact the internal wall of the transition chamber with your hands, use gloves to select and area the samples. Undertaking these routine routine maintenance tasks can minimize the decline charge of the glove box, increase the provider life of the glove box, and also reduce the event of accidents

Main menu 2

by Dr. Radut.